Product SKUs- Discontinued SKU (EOL). Please contact sales-rep for replacement SKUs. |
MBD-X10DRH-iT | |
Physical Stats |
Form Factor | |
Dimensions | - 12" x 13" (30.48cm x 33.02cm)
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
- Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 145W
|
Cores / Cache | - Up to 22 cores † / Up to 55MB† cache
|
Note | - ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
|
System Memory |
Memory Capacity | - Up to 1TB Registered ECC RDIMM, DDR4-2133MHz; Up to 2TB 3DS ECC LRDIMM, in 16 DIMM slots
|
Memory Type | - 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
DIMM Sizes | - RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB
- LRDIMM: 32GB, 64GB
- 3DS LRDIMM: 128GB
|
Memory Voltage | |
Error Detection | - Corrects single-bit errors
|
On-Board Devices |
Chipset | |
SATA | - RAID 0,1,5,10
- Intel® C612 controller for 6 SATA3 (6 Gbps) ports;
|
AHCI SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
|
SCU SATA | - SATA3 (6Gbps); RAID 0, 1, 5, 10
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Dual LAN with 10GBase-T with Intel® X540 10GbE ControllerSingle LAN with Virtual Machine Device Queues reduce I/O overheadSingle LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 outputSingle LAN with 1 Realtek RTL8211E PHY (dedicated IPMI)
|
Graphics | |
Input / Output |
SATA | |
LAN | - 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB | - 4 USB 2.0 ports (2 rear + 2 headers)
- 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
|
Video Output | |
Serial Port / Header | - 2 COM Ports (1 rear, 1 header)2 fast UART 16550 serial
|
TPM | |
Expansion Slots |
PCI-E | - 1 PCI-E 3.0 x16,
- 6 PCI-E 3.0 x8
|
System BIOS |
BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features | - Plug and Play (PnP)
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
Management |
Software | - Intel® Node Manager, IPMI2.0, NMI, SPM, SUM, SuperDoctor® 5, Watchdog
|
Power Configurations | - ACPI Power Management
- Power-on mode for AC power recovery
|
PC Health Monitoring |
Voltage | - +12V, +3.3V, +5V, +5V standby, 3.3V standby, 6 Phase-switching voltage regulator, Memory Voltages
|
FAN | - 8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control
|
Temperature | - Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI
|
LED | - CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID
|
Other Features | - Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC
|
Operating Environment |
Operating Temperature Range | - 10°C - 35°C (50°F - 95°F)
|
Non-Operating Temperature Range | - -40°C - 70°C (-40°F - 158°F)
|
Operating Relative Humidity Range | - 8% - 90% (non-condensing)
|
Non-Operating Relative Humidity Range | - 5% - 95% (non-condensing)
|